City of Henderson Slurry Seal

Photo 1
Asphalt slurry seal on residential road for the City of Henderson. This street was one of many streets part of the City of Henderson’s Pavement Maintenance Program. The City of Henderson uses type 1, type 2, and type 3 asphalt slurry seal to their roads depending on the condition and requirements of the existing asphalt. This is a job that affects many neighborhoods and requires a lot of planning, communication to the public and a good relation with the city.

Photo 2
Asphalt crack seal on residential road in the City of Henderson. The City of Henderson requires the existing asphalt to receive asphalt crack seal prior to asphalt slurry seal being applied. The cracks are prepped and approved before asphalt crack seal is applied. Communication with the public is a priority and residents receive notices prior to asphalt crack seal work being started.

Photo 3
Asphalt slurry seal on residential road in the City of Henderson. In this picture, asphalt slurry seal is being applied with one of our many asphalt slurry seal machines and slurry seal spreader boxes. Prior to this, the asphalt was crack sealed, prepared (traffic control, grinding of oil spots, protected manholes and water valves and swept).

Photo 4
Asphalt crack seal on residential road in the City of Henderson. This picture shows the operator with one of the custom wands used to apply the asphalt crack sealant.

Photo 5
Asphalt crack seal on residential road in the City of Henderson. This is one of the many setups that we use for asphalt crack seal units. The unit has an air compressor to blow out the cracks prior to crack sealing, and is towing one of the asphalt crack sealing machines behind the truck placing the asphalt crack seal promptly after being cleaned.